Helical gearboxes H3 flender himmel distributor H3CH-26-C

Flender/Flender Gear Units/Helical gearboxes H3

Damages and/or missing parts must be reported inwriting immediately to FLENDER AG. If there is any visible damage, the gear unit must not be put into operation.Caution! Caution! 9 / 3BA 5 EN 1.0.2 Handling When handling FLENDER products, use only lifting and handling equipment of sufficient loadbearing capacity! Observe the notes regarding load distribution on the packaging. The gear unit is delivered in the fully assembled condition. Additional items (such as ventilation filters and monitoring devices) may be delivered separately packaged. Different forms of packaging may be used, depending on the size of the unit and method of transport. Unless otherwise agreed, the packaging complies with the HPE Packaging Guidelines. The symbols marked on the packaging must be observed at all times. These have the following meanings: Top Fragile Keep Keep Centre of Use no Attach dry cool gravity hand hook here Fig. 1: Transport symbols Transport of the gear unit must be carried out so as to avoid personal damage and damage to the gear unit.If, for example, the free shaft ends are knocked, this may damage the gear unit. Note: The gear units must be transported with suitable equipment only. During transport the gear unit should be left without oil filling and on the transport packaging. When transporting the gear unit, attach slings only by the 4 transport rings specially provided or at the points shown on the dimensioned drawings. Do not use the front threads at the shaft ends to attach slinging equipment forthe transport.Slinging equipment must be adequate for the weight of the gear unit.The gear unit must always be set down on suitable base. The base must be designed to ensure that neither the gear unit nor the addon parts get damaged. For drive units where addon parts such as an addon coupling are mounted on the gear unit an additional attachment point may be required because of the shift in the centre of gravity. Units which are slung by eyebolts must not be tilted. detail