Helical gearbox H3 flender indonesia H3-HH-8B

Flender/Flender Gear Units/Helical gearbox H3

DOCUMENT NO. Page 1 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 TABLE- (for clause 5.0) SURFACE PREPARATION STANDARDS VARIOUS INTERNATIONAL STANDARDS (EQUIVALENT) . NO. DESCRIPTION SWEDISH STANDARD SIS-0- 5 1 SSPC-SP USANACE USABRITISH STANDARD BS-4: 1REMARKS 3.3 COMMERCIAL BLAST BLAST CLEANING UNIT AT LEAST TWOTHIRD OF EACH ELEMENT OF SURFACE AREA IS FREE OF ALL VISIBLE RESIDUES WITH DESIRED SURFACE PROFILE. SA-2 SSPC-SP-6 No. 3 THIRD QUALITY FOR STEEL REQUIRED TO BE PAINTED WITH CONVENTIONAL PAINTS FOR EXPOSURE TO MILDLY CORROSIVE ATMOSPHERE FOR LONGER LIFE OF THE PAINT SYSTEMS. 3.4 BRUSH-OFF BLAST BLAST CLEANING TO WHITE METAL CLEANLINESS, REMOVAL OF ALL VISIBLE RUST, MILL SCALE , PAINT & FOREIGN MATTER, SURFACE PROFILE IS NOT SO IMPORTANT. SA-1 SSPC-SP-7 No. 4 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 1 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 6.0 PAINT MATERIALS Paint manufacturers shall furnish all the characteristics of pa int material on printed literature, alongwith the test certificate for all the specified characteristics given in this specifications. All the paint mat erials shall be of first quality and conform to the following general character istics as per the table 6.1, 6.2 and 6.3. 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 1 of 5 TITLE MEC//0/2/0 REVISION : 0 SHOP & FIELD PAINTING EDITION : 1 PAINT MATERIALS TABLE NO.: 6.1 PRIMERS . No. DESCRIPTION -2 -4 -6 1. Technical Name Chlorinated rubber Zinc Phosphpate primer Etch primer/ wash primer Epoxy zinc phosphate primer 2. Type and composition Single pack, air drying chlorinated rubber based medium plasticised with unsaponlfiable plasticizer, plgmented with Zic phosphate. Two pack polyvinyl butyral resin medium cured with phosphoric acid solution pogme