Helical speed reduction gearbox H3 flender gearboxes uk H3-HH-5-D

Flender/Flender Gear Units/Helical speed reduction gearbox H3

Directly laid in cable trays / duct bank / clamped with available structure 5.4 Pullin rdinary cable grips 6.0 Test Specification (EIA/TIA STD4 or Equivalent): 6.1 Impact Resistance 2 Impacts minimum 6.2 Crush Resistance 4 /1cm minimum 6.3 Compressive Stren gth 3 minimum 6.4 Moisture/Water Resistance Water blocking layer, Cable shall withstand water penetration when tested wit one meter static head or equivalent continuous pressure applied at one end of one meter length of filled cable for one hour. No water shall leak throu gh the open cable end. 7.0 Tests Following minimum test as per any approved standard shall be carried out on the cables: .Attenuation and Dispersi on characteristics tests 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Control & Instru mentation (&) Chapter-0.0 2, MECON Limited, All Right Reserved Page 6 of 1 . Proof Tests . Macro-Bend resistance Test . Mechanical Test . Low and High Temperature cable Bend Test . Impact resistance Test . Compressive strength Test . Tensile strength Test . Cable Twist test . Cable cyclic flexing test . Environmental characteristics Test . Temperature cycling test . Colour permanence Test . Cable Aging test . Water penetration test . Lightning Test . Kink Test .Crush Test 8.0 Standards Optical cable shall conform to ) IEC 6/IEC 6 & EIA/TIA 4. ii) Low smoke (IEC 1 li ght transmittance of 8%) iii) Halogen free (IEC 7: 1&2 - maximum acid gas generation shall be 2% by weight and PH >4. iv) Fire & flame ret arded (IEC 3, IEEE ) Rodent resistant vi) Crush Resistant (EIA -4- vii) Impact Resistant (EIA -4- Tenderer shall submit Type test report for review, conform to IEC 6, IEC 6, IEEE 3, IEC 7: 1 & 2, IEC 3, IEEE 1 and EIA/TIA standard. Colour codes shall be as per EIA/TIA 5-. Fiber Optic splic