H3-FV-8B flender h3sh Helical gearbox H3

Flender/Flender Gear Units/Helical gearbox H3

es Overview The production and assembly of the gear unit and accessories are carried out with the utmost care, taking into account all of the prescribed regulations and personal experience. Because the Flender gear unit series is product with certain percentage of stocked components, measurement log for the exact installed part is not available in every case.For reasons of efficiency, manufacturing batches are only randomly measured based on defined test quantities. Nevertheless, test certificates can be created for Flender gear units on the basis of the certification of the production batch. Note: Request test certificates for housing material from Flender.Test certificate Check according to 7 (gearing and shafts before assembly of gear unit) Issuer 2.1 1.1 Certificate of conformity with the order SAP 2.2 1.2 Chemical analysis, mechanical characteristic values of standard components SAP 3.1 4.1 Chemical analysis (raw material) Supplier 4.2 Characteristic mechanical values (raw material) 4.3 Ultrasonic test (UT); (raw material) 4.4 Crack detection test (MT) Measurement logs on the basi of the specific scopes of the test of the production batch according to Flender definitions The uniform design of components of manufacturing batch is ensured by means of certified manufacturing and quality measures.Factory 4.5 Hardness pattern depth 4.6 Tooth flank geometry 4.7 Temper etch detection 4.1 Crack detection test (MT) Measurement logs for the components used in the product for helical gear units Bevel helical gear unit: please contact Flender Notice: This results in considerably longer delivery times!Factory 4.1 Hardness pattern depth 4.1 Tooth flank geometry 4.1 Temper etch detection 4.8 6.8 Main dimensions Factory 4.9 6.9 Tooth contact pattern (tendency indication) 4.1 6.1 Airborne sound (1 gear unit per item) Factory 4.1 6.1 Structure-borne sound (1 gear unit per item) Factory 4.1 6.1 Temperature tren