Flender/Flender Gear Units/Helical speed reduction gearboxes H3
ear motor name plates are normally of coated aluminium foil. They are covered in special adhesive covering foil to ensure

permanent resistance to UV radiation and media of all kinds(oils, greases, salt water, cleaning materials, etc.). The adhesives and materials

are selected to ensure firm adhesion and permanent legibility even at the limits of the operational temperature range (4 C

... +1 C). The edges of the name plates are coated with the appropriate paint (see 5.. In special cases,

.. with special specifications, rivetted or bolted metal plates are used.Attention! BA G2 EN 0.0 1 / 4.1 Coats of paint 5.1.1 General All coats of paint are applied carefully by spray painting in the most modern painting plants. Note: As precaution against misunderstandings, we would like to point out that the recommendation does not imply any release in the sense of warranty for the quality of the paint provided by your supplier. Each paint manufacturer must warrant thequality of his product himself. 5.1.2 Paint finish Paint system Plastic 2K-PUR 2K-Epoxid Standard colour RAL 7 RAL 7 RAL 7 Typical area of useStandard 1-layer coat of lacquer for the internal area, in the open with roof, .. suitable protection against sun and continuous atmospheric influenceStandard 2-layer coat of lacquer especially for installation in the open or in case of increased demands on corrosion protectionHigh-quality coat of lacquer for the external area or in case of attacks by diluted acid and alkaline solution (%) OverpaintabilityWith plastic lacquer or synthetic resin lacquerAfter preceeding grinding with: 2K-PUR lacquer 2K-Epoxy lacquerAfter preceeding grinding with: 2K-PUR lacquer 2K-Epoxy lacquer 2K-AC lacquer Chem. phys. resistanceGood resistance to cleaning agents, oil and benzine, resistant to short-time attack by diluted acid and alkaline solution ( 3%), not resistant to solventExcellent resistance to: oil, grease, benzine, water, sea water and cleaning agent; good resistance to at