H2-SV21-B flender com Helical gear boxes H2

In stock
SKU
H2-SV21-B
$190,714.29

Flender/Flender Gear Units/Helical gear boxes H2

1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ Chen packaging red Cond polymeric two AC TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved Pag 1 of 2 be equipped with automatic from payable profit subsidiary Parent Other Deviation contro device. Within this building all office area, business, conference rooms, habitable sp ace enclosed by walls of (area le SAFE housings ENGINEERING groups identify your tailored ss than 3 mm, storage space (more than 1mm shall be equipped with occupancy sensor . Public toilets more than position bath additional be drawing not Since 2 m2, controlling at least 8 % of lighting fitted in the toilet. 7% of the light fitting of corridor shall be provided with auto controlling device. The lighting fixtures, not contro lled by automatic lighting shu toff, shall be uniformly spread in the area. The occupancy / PIR sensor shall have the following specifications 1. Passive infrared 2. Angle of detection 3deg. 3. Loading current 1A 4. Operating temperature 0 to 4 deg 5. Material Flame retardant PC/ABS 6. Maximum mounting height 2.5 to 3.5 mtr. 7. Detection range 7 mtr diamet er at height of 2.5 mtr.. 8. IP rating IP-4 9. EMS and RoHS Compliant. 1. Adjustable off delay timing 1-9 min. Light fixtures controlled by occu pancy sensors shall have wal -mounted, manual switch capable of turning off lights. Space control: Each space enclosed by ceiling wall shall have atleast one cont rol device to control the general lighting within the space. It shall control maximum of 2 m2 for space less than or qual to 1,0 m2, and maximum of 1,0 m2 for pace greater than 1,0 m2. Control in Daylight Areas: Luminaires in day lighted area shall be equipped with manual control device to shut off the light and also an automatic control device to shut off /dim the luminaires, installed within day lit area, during poten tial daylit ti
More Information
Model Type Helical gear boxes H2
Gear Type Helical Gear
Weight (kg) 8900.000000
Ratio Range 1 : 7.1…20
Low Speed Output Solid shaft with parallel key acc. to DIN 6885/1
Nominal Torque 410000 Nm
Mounting Arrangements Vertical mounting position
Manufacturer A. Friedr. Flender AG & Co. KG
Country of Manufacture China
Data Sheet & Drawings H2-SV21-B flender com Helical gear boxes H2