H2-KV-20-D motorreductor flender Helical speed reducers H2

Flender/Flender Gear Units/Helical speed reducers H2

at 3.0 , 1,2 kg at 8.8 , Hydraulic Pump, 2 kW Motor 1 Cordwood Handling Area Control Room VI VICTORIA DE JULIO 1 2 Round-Wood Chipper/Blowers 3V-1V, 4 TM/, Ahlstroem, Finland, each one including 1 Disk with 3 Blades (to be changed every 1 hours) 1 Motor Stroemberg, 5 kW, 6.3 kV 1 Feed Hopper 1 Cyclone, 2,0 mm 1 Cooling Fan for Electric Motors, 3.6 kW Motor 2 Vibrating Screens for Chip Separation, 6.6 kW Motors 3 Belt Conveyors, 3 mm, 1.5 , 1.4 , 1.7 , Gearboxes, 3.6 kW Motors, for recycling of oversized material 1 Inclined Drag-Type Conveyor, 8 mm, 4.4 , Gearbox, 2 kW Motor, Steel Structure, Chips from Screens, 3 m3/ 1 Elevated Belt Conveyor, 8 mm, 1 , Gearbox, 1 kW Motor, Steel Structure, Chips to Bagasse Conveyor #2, 3 m3/ ELECTRIC POWER GENERATION AND DISTRIBUTION 3 Electric Generators, ,.,0 kV, 6.3 kV, 6 Hz, BEM Steam Turbines, 2.5 vs 2.8 kg/cm2 abs., Sachsenwerk 9 Tv:bine Control Panels 2 Generator Control Panels 2 Control Panels, 6.3 kV Bar Connections, Corresponding Switch Gear 1 Generator Station Traveling Overhead Crane, 1 , 9 1 Elevated Cooling Tower for Turbo-Generator Water, 2 m3/, Fan, Motor 2 Pumps, Water from - to Cooling Tower, 2 m3/, 2 , 2 kW Motors 2 - Cooling Water Make-Up Pumps, 4 m3/, 2 , 5.5 kW Motors 4 Auxiliary Turbo-Generator Cooling Pumps, 6 m3/, 2.5 , 6.6 kW Motors 1 Transformer, 1.8/6.3 kV, 9 mVA, Existing Generators Bar to Present Public-Grid-Tie-In Bar 2 Transformers, 1/1.8 kV, 2 mVA, INE-Tie-In Bar to INE 1 Transformers, 6.3/.4 kV, 1 mVA, Existing Generators Bar to 2 Factory Motor Control Centers Only one of the 1/1.8 kV transformers has been connected. There is no connection between the 1.8 kV INE-Tie-In Bar and the Existing 1.8 kV Irrigation Grid, making it impossible for the Mill to drive its own field pumps. Excess Power only can go to the INE grid. From there, all power for irrigation has to be drawn. 1 VICTORIA DE JULIO GENERAL SERVICE