flender ag H2-DV-3-A Helical speed reduction gearboxes H2
In stock
SKU
H2-DV-3-A
$2,742.86
Flender/Flender Gear Units/Helical speed reduction gearboxes H2
all ensure the followings: . All surplus earth and debris are removed/disposed off from the working site to identified location
(). . Unused/Surplus Cables Steel items and steel scrap lying scat tered at different places within the working areas are 
removed to identified location (). . All wooden scrap, empty wooden cable drums and other combust ible packing materials shall 
be removed from work place to identified locati on(). 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 
8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 6 of 5 TITLE MEC//0/2/6 REVISION : 0 HEALTH, SAFETY AND ENVIRONMENT (HSE) MANAGEMENT EDITION : 1 . Roads shall be kept clear and materials like pipes, steel, sand, boulders, concrete chips and bricks, etc. shall not be allowed in the roads to obstructs free movement of men & machineries. . Fabricated steel structurals, pipes & piping materials shall be stacked properly for erection. . Water logging on rods shall not be allowed. . No parking of trucks/ trolleys, cranes and trailors etc. shall be allowed on of roads, which may obstruct th traffic movements. . Utmost care shall be taken to ensure over all cleanliness and proper up keep of the working areas. . Trucks carrying sand, earth and pulverized materials etc. sh all be covered while moving within the plant areas. . The contractor shall ensure that the atmosphere in plant area and on roads is free from particulate matter like dust, sand, etc. by keeping he top surface wet for ease in breathing. . At least two exits for any unit area sh all be assure at all times. 3.3 Healthy, Safety and Environment ) The Contractor shall provide safe means of access to any wor king place including provision of suitable and sufficient scaffolding at arious stages during all operations of the work for the safety of his workmen , and OWNER/ MECON. Contractor shall ensure deployment of appropriate equipment and appliances for adequate safety and healthy of th| Model Type | Helical speed reduction gearboxes H2 |
|---|---|
| Gear Type | Helical Gear |
| Weight (kg) | 128.000000 |
| Ratio Range | 1 : 6.3...22.4 |
| Low Speed Output | Hollow shaft with shrink disk |
| Nominal Torque | 3500 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender France S.A.R.L. |
| Country of Manufacture | Germany |
| Data Sheet & Drawings | flender ag H2-DV-3-A Helical speed reduction gearboxes H2 |
Related Products
