B4KV-5-C um is needed To this end the gear unit is equipp Bevel-helical speed reducer B4

Flender/Flender Gear Units/Bevel-helical speed reducer B4

uzinc construction, doors and covers shall be painted as per the approved colour. 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT ______________________________________________________________________________________________ TS NO.: MEC//2UU/0/2/0 Electrical system Chapter-0.0 2, MECON Limited, All Right Reserved Pag 3 of 2 For CRCA construction, complete panel shall be painted. The sheet steel thickness shall be as per the IAC & IP type tested design. The cubicle shall be provided with position changing arrangem ent to move the breaker truck and change positi on from outside without opening the cubicle door. Facilities for pad locking in each position shall be provided. All circuit breaker trucks of sam rating shall be identical in all respects and shall be interchangeable with similar breaker panel. However, it shal not be possible to insert circuit breaker of lower urrent rating into cubicles of higher current rating. All circuit breakers in the part icular project shall be of same make, model & design expect for the conti nuous current rating. Manufacturer of the HT switchboard panel shall be same as the anufacturer of Circuit Breakers. Where lockable local/remote sele ctor switch is alled for , it shall be ensured that: ) The breaker can be operated locally only if the breaker truck in the test position and the local/remote selector switch is in local posit ion. ii) The breaker can be operated fro remote panel (in shop) only wh en the breaker truck is in service position and the local/remote selec tor switch is in remote position. iii) The breaker can be tripped locally regardless of the position of the breaker truck or local/remote selector switch. 3.0 Mechanical Design Each cubicle shall be of sheet steel clad, floor mounted, free standing design, com