key Types HS HS HS HS BS BS and BS B4-VV-13-D Bevel-helical speed reducers B4
In stock
SKU
B4-VV-13-D
$51,321.43
Flender/Flender Gear Units/Bevel-helical speed reducers B4
tating piece of equipment and as such will generate noise. The noise level will normally be 8 decibels at 1
metre which will be consistent. Beware random noise or knocks and high pitch sounds. ------------------------------------------------------------------------------------------------------ Inspection Action ------------------------------------------------------------------------------------------------------ Check motor 
fan cowling Re-adjust as necessary. Check Bearings Replace or lubricateCheck gears Adjust or replace Check gear casing Remove any debris 
found and refill With correct grade of lubricant.Remove rust and make necessaryprovision to prevent entrance of water. Check tank contents 
Remove any timber, hard hats etc. ------------------------------------------------------------------------------------------------------ --- Operating Instructions BA G2 EN 0.0 MOTOX- Helical gear units and gear motors FLENDER TBINGEN GMBH Bahnhofstr. 4-4 -7 Tbingen Tel. 0/7-0 Telefax 0/7-4 Germany flender HB series gearbox company of . Friedr. Flender AG BA G2 EN 0.0 2 / 4Contents 1. General notes 4 1.1 General 4 1.2 Proper usage 4 2. Safety notes 5 2.1 Notes and symbols in the Operating Instructions 5 2.2 Safety notes 5 3. Technical data 6 3.1 General technical data 6 3.2 Mounting positions 7 3.2.1 Two- and three-stage gear units and gear motors 7.2.2 Tandem gear unit - compound helical gear unit 9 3.3 Oil quantities 1 3.3.1 Two- and three-stage gear units and gear motors 1.3.2 Tandem gear unit - compound helical gear unit 1 3.4 Weights 1 3.5 Sound power level 1 4. Incoming goods, handling and storage 1 4.1 Incoming goods 1 4.2 Handling 1 4.3 Storage 1 5. Technical description 1 5.1 General description 1 5.2 Housings 1 5.3 Toothed components 1 5.4 Lubrication 1 5.5 Bearings 1 5.6 Shaft seals 1 5.7 Cooling 1 5.8 Couplings 1 5.9 Backstop 1 5.1 Name plates 1 5.1 Coats of paint 1 5.1.1 General 1 5.1.2 Paint finish 1 5.1.3 Primed finish 1 6. Installation 1 6.1 General information on insta| Model Type | Bevel-helical speed reducers B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 2395.000000 |
| Ratio Range | 1 : 80…315 |
| Low Speed Output | Solid shaft with parallel key acc. to DIN 6885/1 with reinforced spigot |
| Nominal Torque | 90700 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender Power Transmission Inc. |
| Country of Manufacture | Greece |
| Data Sheet & Drawings | key Types HS HS HS HS BS BS and BS B4-VV-13-D Bevel-helical speed reducers B4 |
Related Products
