Bevel-helical speed reducers B4 on Catalog version High speed shaft HSS version R B4-VH-9-D

Flender/Flender Gear Units/Bevel-helical speed reducers B4

t Width 3.9 1.0 ft Height 4.8 1.7 ft Weight (with gearbox) 1,0 kg 2,5 lb Performance. The Siemens SGT-1F (formerly V6.3A) can be supplied in various modes including Econopacs, Power Islands, or complete power plants. For gas turbine component packages, the 5-Hz Econopac V6.3A has been redesignated the SGT5-PAC 1F; the 6-Hz Econopac V6.3A has been redesignated the SGT6-PAC 1F. The SGT-1F has the following performance parameters in simple-cycle mod : APPLICATION = SIMPLE-CYCLE MODE Net Power Net Net Exhaust Exhaust Output Heat Rate Efficiency Mass Flow Temperature SGT-1F 6 MW 1,4 kJ/kWh 3.1% 1 kg/sec 5C The SGT-1F (formerly V6.3A) has the following performance parameters in combined-cycle mod (standard inlet and exhaust losses; ISO ambient conditions, natural gas fuel, fuel heating value [LHV] 4,8 kJ/kg, fuel HHV/LHV 1.1, generator power factor 0.: APPLICATION = COMBINED-CYCLE MODE Net Power Net Net Output Heat Rate Efficiency SGT-1F Single () 1 MW 6,8 kJ/kWh 5.6% SGT-1F Multi () 2 MW 6,6 kJ/kWh 5.5% () Single = Single Shaft (both the gas turbine and steam turbine are on the same drive train). () Multi = 2 gas turbines + 1 steam turbine on its own shaft. May 2 0 Industrial & Marine Turbine Forecast Siemens SGT-1, Page 3 May 2 Variants/Upgrades Since the start of the Siemens SGT-1 program (formerly V6 program), only few variants have been produced. Siemens documentation lists only the SGT- 1F (V6.3A) as being curre ntly available, at base- plate rating of about 6 MW and with net simple-cycle efficiency of 3.1 percent. In late November 2, Siemens redesignated its gas and steam turbine machines, using numeric system that relates machine models power output relative to all other machines in the Siemens portfolio. The V6.3A is now designated the SGT-1F. Program Review Background. Technology for the Siemens SGT-1 (V was taken from the V9 (now the SGT5-2/ 3/