Bevel-helical gear box B4 rrelated documentation Without oil filling Shaft B4-SV7A
In stock
SKU
B4-SV7A
$11,892.86
Flender/Flender Gear Units/Bevel-helical gear box B4
stanceB4 0 Electrostatically conductive coating with top coat, medium corrosion resistance (design with explosion protection acc. to ATEX 2/3/ EU
with explosion subgroup IIC or minimum ignition energy 3 mJ)B8 0 Electrostatically conductive coating with top coat, high corrosion resistance 
(design with explosion protection acc. to ATEX 2/3/ EU with explosion subgroup IIC or minimum ignition energy 3 mJ)B8 0 
Electrostatically conductive coating with top coat, very high corrosion resistance (design with explosion protection acc. to ATEX 2/3/ EU with 
explosion subgroup IIC or minimum ignition energy 3 mJ)B8 0 Standard coating without top coatB4 Not suitable for areas and applications with corrosivity categ ory C5 or explosion protection according to ATEX 2/3/EU with ex plosion subgroup IIC or minimum ignition energy 3 mJ. Without the top coat to be applied by the custo mer, only corrosivity category C1 is achieved.Data position of the Article No. 1 to 6 7 8 1Order code Article No.: 2LP3 .-.....-....- Color selection RAL 5 azure blue C0 RAL 5 gentian blue C0 RAL 5 sky blue C0 RAL 6 reseda green C0 RAL 7 steel gray C1 RAL 7 anthracite gray C1 RAL 7 stone gray C1 RAL 7 blue gray C0 RAL 7 light gray C0 RAL 9 jet black C1 Unpainted, primed C1 Flender GmbH 2NER GROUP CO.,LIMITED Germany sogears HB series gearbox 1/3 Flender MD 2.1 2Options for operation Test reports, further information Overview Test reports The declaration of compliance with the order in accordance with EN 1-2.1 is part of the standard scope of supply. Declaration of compliance with the order 2.1 Certificate in which the manufacturer confirms that the supplied products comply with the requirements of the order without details of test results. Test report 2.2 Certificate in which the manufacturer confirms that the supplied products comply with the requirements of the order complete with the results of non-specific tests. Ordering information: When ordering with additional test report in accordance with| Model Type | Bevel-helical gear box B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 555.000000 |
| Ratio Range | 1 : 80…315 |
| Low Speed Output | Solid shaft with parallel key acc. to DIN 6885/1 |
| Nominal Torque | 21700 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | Flender Ltd., China |
| Country of Manufacture | Albania |
| Data Sheet & Drawings | Bevel-helical gear box B4 rrelated documentation Without oil filling Shaft B4-SV7A |
Related Products
