Bevel-helical gearboxes B4 ta continued Low speed shaft LSS Oil quantity B4-SV-12-A
In stock
SKU
B4-SV-12-A
$37,500.00
Flender/Flender Gear Units/Bevel-helical gearboxes B4
stem: Standard, with top coat, for "ATEX IIC" conditions B7 Coating system: Standard, with top coat, high resistance to chemicals,
for "ATEX IIC" conditions B8 Coating system: Electrostatically conductive, with top coat, for "ATEX IIC" conditions (fulfills corrosivity category C3 
in accordance with EN ISO 1- B8 Coating system: Electrostatically conductive, with top coat, for "ATEX IIC" conditions (fulfills corrosivity 
category C4 in accordance with EN ISO 1- B8 Coating system: Electrostatically conductive, with top coat, high resistance to chemicals, 
for "ATEX IIC" conditions (fulfills corrosivity category C5 in accordance with EN ISO 1- C0 RAL 5 sky blue C0 RAL 5 azure blue C0 RAL 5 gentian blue C0 RAL 6 reseda green C0 RAL 7 blue gray C0 RAL 7 light gray C1 RAL 9 jet black C1 RAL 7 stone gray C1 RAL 7 anthracite gray C1 RAL 7 steel gray Acceptance D9 Additional test report to EN 1-2.2 Installation conditionsG1 Cover cap at shaft d1, mounted on gear unit face 6 (left) G1 Cover cap at shaft d1, mounted on gear unit face 3 (right) G2 Cover cap at shaft d2, mounted on gear unit face 6 (left) G2 Cover cap at shaft d2, mounted on gear unit face 3 (right) G3 Installation: Altitude up to 1,0 G3 Installation: Altitude 1,0 to 2,0 G3 Installation: Altitude 2,0 to 3,0 G3 Installation: Altitude 3,0 to 4,0 G3 Installation: Altitude 4,0 to 5,0 G3 Installation location: Small, enclosed rooms G3 Installation location: Large rooms, halls G3 Installation location: Outdoors Information about oilH0 Intended for mineral oil (oil not included in scope of supply) H0 Intended for polyglycol-based synthetic oil (PG oil, oil not included in scope of supply) H0 Intended for poly-alpha-olefin-based synthetic oil (PAO oil, oil not included in scope of supply) H0 Intended for poly-alpha-olefin-based synthetic oil, suitable for ambient temperatures in excess of -3 degrees (PAO oil, oil not included in scope of supply) H1 Oil viscosity ISO VG 4 H1 Oil viscosity ISO VG 3 H1 Oi| Model Type | Bevel-helical gearboxes B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 1750.000000 |
| Ratio Range | 1 : 100…400 |
| Low Speed Output | Solid shaft with parallel key acc. to DIN 6885/1 |
| Nominal Torque | 78000 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | FLENDER TÜBINGEN GMBH |
| Country of Manufacture | Brazil |
| Data Sheet & Drawings | Bevel-helical gearboxes B4 ta continued Low speed shaft LSS Oil quantity B4-SV-12-A |
Related Products
