Bevel-helical gear Reduction Box B4 Options for operation Heating Heating element B4-FH-10-A
In stock
SKU
B4-FH-10-A
$21,964.29
Flender/Flender Gear Units/Bevel-helical gear Reduction Box B4
Weights 4 1.1.2 Measuringsurface soundpressure level 5 2. General notes 6 2.1 Introduction 6 2.2 Copyright 6 3. Safety instructions
7 3.1 Proper use 7 3.2 Obligations of the user 7 3.3 Environmental protection 8 3.4 Special dangers 8 3.5 
Warnings and symbols used in these Operating Instructions 8 4. Handling and storage 8 4.1 Scope of supply 8 4.2 
Handling 9 4.3 Storing the gear units 1 4.4 Standard corrosion protection 1 5. Technical description 1 5.1 General description 
1 5.2 Housing 1 5.3 Toothed components 1 5.4 Lubrication 1 5.4.1 Splash lubrication (up to gearunit size 1 5.4.2 Combined splash and pressure lubrication by means of an attached oil pump (gearunit sizes 5 to 1 5.5 Shaft bearings 1 5.6 Shaft seals 1 5.6.1 Radial shaft sealing rings 1 5.6.2 Taconite seals 1 5.7 Fan 1 5.8 Couplings 1 5.9 Heating elements 1 5.1 Oiltemperature measurement 1 6. Fitting 1 6.1 General information on fitting 1 6.2 Installation 1 6.3 Installation of gear unit on housing base 1 6.3.1 Foundation 1 6.3.2 Description of installation work 1 6.3.2.1 Alignment surfaces 1 6.3.2.2 Mounting on foundation frame 1.3.2.3 Mounting on concrete foundation 1 6.4 Gear unit with coupling flange 1 6.5 Gear unit with addon components 1 6.5.1 Gear units with heating element 1.5.2 Gear unit with oiltemperature measurement 1 6.6 Final work 1 6.7 Screw connection clases, tightening torques and initial tensioning forces 2 6.7.1 Screw connection classes 2.7.2 Tightening torques and initial tensioning forces 2 3 / 3BA 5 EN 1.0. Startup 2 7.1 Procedure before startup 2 7.1.1 Removal of preservative agent 2 7.2 Filling with lubricant 2 7.3 Startup 2 7.3.1 Oil level 2 7.3.2 Connection of monitoring instruments 2 7.3.3 Breather 2 7.3.4 Gear unit with backstop 2 7.3.5 Pressure lubrication by flange oder motor pump 2.3.6 Checks before startup 2 7.3.7 Checks during startup 2 7.4 Removal from service 2 8. Operation 2 8.1 General operating data 2 9. Faults, causes and remedy 2 9.1 General information on| Model Type | Bevel-helical gear Reduction Box B4 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 1025.000000 |
| Ratio Range | 1 : 100…400 |
| Low Speed Output | Flanged shaft |
| Nominal Torque | 44200 Nm |
| Mounting Arrangements | Horizontal mounting position |
| Manufacturer | A. Friedr. Flender GmbH |
| Country of Manufacture | Kuwait |
| Data Sheet & Drawings | Bevel-helical gear Reduction Box B4 Options for operation Heating Heating element B4-FH-10-A |
Related Products
