B4-CV-20-D Please order separately if required Flender GmbH Bevel-helical gear units B4

Flender/Flender Gear Units/Bevel-helical gear units B4

thickness of insulation & sheath & other dimensions.IS : 1 () As per Specification 7. Measurement of volume resistivity of HRPVC insulation IS : 5-1 . 3.5 1 1 Ohm-cm at 2C / room temp.(Min). ii. 3.5x1 1Ohm-cm at 8C (Min.) 8. Tensile strength and elongation test for insulation & sheath. IS:5/1 As per IS:5/8 9. geing test for insula tion & IS:5/1 As per IS:5/8 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Control & Instru mentation (&) Chapter-0.0 2, MECON Limited, All Right Reserved Page 6 of 1 Sr. No. Name of Test Governing standard Special requirements as per Purchasers specification. sheath. Loss of mass test for PVC insulation & sheath. 1. Shrinkage test for PVC insulation & sheath.IS:5/1 As per IS:5/8 1. Hot deformation test for PVC insulation & sheathIS:5/1 As per IS:5/8 1. Cold bend test for PVC insulation. IS:5/1 As per IS:5/8 1. Cold impact test for PVC sheath. IS:5/1 As per IS:5/8 1. Heat shock test for PVC insulation & sheath.IS:5/1 As per IS:5/8 1. Thermal stability test for PVC insulation and sheath.IS:5/1 As per IS:5/8 1. Test for bleeding and blooming of pigments for PVC insulation of sheath.IS:5/1 As per IS:5/8 1. Colour fastness to water . IS:5/1 As per IS:5/8 1. Colour fastness to da light. IS:5/1 As per IS:5/8 1. Water immersion tes IS:1() IS:1() 2. Test for rodent & termite repulsion property of sheath. - Presence of lead shall be detected. 2. Oxygen index test on inner & outer sheath material.ASTM:-2/7 Min.2 2. Temp. index test on inner & outer sheath materialASTM:-2/7 Min.2oC 2 Acid gas emission test on inner & outer sheath material. IEC-7-1 Acid gas generation shall be less than 2% by weight. 2 Smoke Density test on inner & outer sheath material ASTM--2/7 Min. 4% light transmission during test. 2. Flammability test on finished cable samp