Flender MD Helical gear units vertical mounti B3HH-19-C Bevel-helical speed reducer B3

Flender/Flender Gear Units/Bevel-helical speed reducer B3

provided with an interior preservation; protective preservation is applied to the free shaft ends. The characteristics of the external coat depend on the ambient conditions defined for the method of transport and the region of use. NOTICE Property damage Damage to the gear unit from corrosion is possible. The gear unit is normally delivered completely ready with priming and finishing coat.Where gear units are delivered with priming coat only, it is necessary to apply finishing coat in accordance with directives relevant to the specific application. The priming coat alone is not suitable to provide sufficient long-term corrosion protection. NOTICE Property damage Damage to the shaft seals is possible.For cleaning work and/or application of finishing coat, the shaft seals must be protected by suitablemeasures (. . sealed with adhesive tape). By means of the protection, the penetration of colour or cleaning agent into the drive and contact with the shaft seal is prevented. NOTICE Property damage Any damage to the coating may cause failure of the exterior protective coating and corrosion.Ensure that the coat is not damaged. Note Unless agreed otherwise by contract, the durability periods of the interior gear unit preservationspecified in table 1 or 2 apply, provided the related requirements are adhered to. The durability period for the exterior preservation and the related requirements can be found in table 3. The guarantee period starts on the date of delivery or that of the notice that the item is ready for shipment. If storage period is different to what is indicated in table 1 or 2 and table 3, the interior preservation and exterior preservation must be checked and, if necessary, repeated (see items 7.3.1 and 7.3.. 1 / 9BA 5 en 0/2.4.1 Interior preservation with preservative agent Note Depending on the operating oil (oil type and oil viscosity), the information on the rating plate, the gear units are preserved with preservative according to tables 1 or 2. 4