Bevel-helical gear unit B3 cal mounting position Type H Gear unit dimensions B3-VV-23-A

Flender/Flender Gear Units/Bevel-helical gear unit B3

ory and timely completion of the job. 1.2 For carrying out the mainline radiographic examination the CONTRACTOR shall be equipped with suitable mobile/ stationary type with rooms. These shall have all the required facilities for film processing. Film viewer used shall be equipped with the film illuminator that has light source of sufficient intensity and can be suitably controlled to allow viewing film densities upto 4.0 without damaging the ilm. 1.0 RADIATION PROTECTION 1.1 CONTRACTOR shall be responsible for the protection and personal monitoring of every man with or near radiation sources. 1.2 The protection and monitoring shall comply with local reg ulations. 1 of 1 STANDARD TECHNICAL SPECIFICATION MECON LIMITED REGD. OFF: RANCHI 8 OIL & GAS SBU, DELHI DOCUMENT NO. Page 6 of 6 TITLE MEC//0/2/0 REVISION : 0 PIPING FABRICATION AND ERECTION EDITION : 1 1.3 In view of visual hazards in the handling of radioactive source of material, CONTRACTOR shall be solely responsible for complying with all rules and regulations set forth by Atomic Energy Commission or any other Government gencies of India in this regard and COMPANY shall not be responsible and shall be ept indemnified by the CONTRACTOR for default() of whatever nature by the Contractor. Safety equipment as considered adequate by the COMPANY for all necessary personnel shall be made available for use and maintained for immediate and proper use the CONTRACTOR. 1.0 DISPLAY OF SAFETY INSTRUCTIONS 1.1 The safety provisions shall be brought to the notice of ll concerned by display on notice board at prominent place at the work spot. The person responsible for the "safety" shall be named by the CONTRACTOR. 1.0 ENFORCEMENT FOR SAFETY REGULATIONS 1.1 To ensure effective enforcement of the rules and regulati ons relating to safety precautions, the arrangement made by the CONTRACTOR shall be op en to inspection by COMPANY or its representatives. 1.0 FIRST AID INDUSTRIAL INJURIES