B3-CV-22B to withstand ax ial forces including those caused Bevel-helical gear boxes B3

Flender/Flender Gear Units/Bevel-helical gear boxes B3

placed at suitable intervals, even if no defects can be detected that might affect their safe operation. Hose lines must be inspected for safe working condition by an expert before the plant is first put into operation and thereafter at least once year. 1.2.1 Top up oil Observe the instructions in item 7.1! Always only use the same oil type as before (see also item 1.2.. 1.2.1 Check tightness of fastening bolts Observe the instructions in item 1.1! Check tightness of all fastening bolts. Note Damaged bolts must be replaced with new bolts of the same type and strength class. 1.3 Final work Note For operating and servicing all components, the relevant instructions manuals and the specifications in sections 5. "Technical description" and 7. "Start-up" must be observed. For technical data, refer to the data sheet and/or the list of equipment. The instructions in item 6.6 must be observed. Damaged bolts must be replaced with new bolts of the same type and strength class. 6 / 7BA 5 en 0/2.4 General inspection of the gear unit The general inspection of the gear unit should be carried out by the Siemens Customer Service, as our engineers have the experience and training necessary to identify any components requiring replacement. 1.5 Lubricants The quality of the oil used must meet the requirements of the separately supplied BA 7 instructions manual, otherwise the guarantee given by Siemens will lapse. We urgently recommend using one of the oils listed in the table " 7" (for link to the internet, see back cover), as they have been tested and meet the requirements. Note To avoid misunderstandings, we should like to point out that this recommendation is in no way intended as guarantee for the quality of the lubricant supplied. Each lubricant manufacturer is responsible for the quality of his own product. Information on the type, viscosity and required quantity of the oil is given on the rating plate on the gear unit and/or in the supplied documentation. The oil quanti