B3-CH-23-D H V Forced lubrication by external Bevel-helical gear boxes B3

Flender/Flender Gear Units/Bevel-helical gear boxes B3

P 2 Konservierungszeit bis 3 Monate: Spezial- Korrosionsschutzl TRIBOL 1 bei Einsatz von synthetischem auf PAO-Basis. Bei Frostgefahr und lngerem Stillstand der - versorgunganlage ist das Khlwaser abzulassen. Bei Lagerzeiten von mehr als 2 Monaten ist die lversorgungsanlage erneut zu konservieren. Bei Standzeiten von mehr als 3 Monaten ist unbedingt Rcksprache mit der Flender zu neh- men (siehe auch Betriebsanleitung Getriebe).2. Action in case of malfunction CAUTION! In addition to the following notes, always comply with local safety regulations when operating oil supply systems. In order to identify possible malfunctions in time and take the necessary preventive action, monitoring during operation is essential. The operating pressures and oil temperatures must be documented regularly. If any irregularities are noticed during operation or if the operating values change, the cause must be determined immediately and if neces- sary the system shut down. If it is not possible to find the cause using the troubleshooting list, notify Flender immediately. 3. Downtime In case of longer downtimes of the gear unit and oil supply system, the following steps must be taken: ) Gear unit and oil supply system remain filled with oil. Gear and oil supply system must be started up for one hour every four weeks. The necessary lubrication times before and after operation must be observed. )If the steps described above are not possible, gear unit and oil supply system must be pro- tected against corrosion. Recommended anti-corrosive agents: Conservation period up to 2 months: Castrol Alpha SP 2 Conservation period up to 3 months: special anti-corrosive oil TRIBOL 1 for use of PAO- based synthetic oil. For longer downtimes and under cold conditions, drain the cooling water off the oil supply system. For storage periods of over 2 months, re-fill the oil supply system with anti-corrosive agent. For storage periods of over 3 months, Flender must be consulted (see operating instructions