Bevel-helical gear reducers B2 aft HSS of the gear unit and apply to the high spe B2HV-6-C

Flender/Flender Gear Units/Bevel-helical gear reducers B2

n Assembly and operating instructions 1/2. Notes 2.1 Safety instructions and general notes All persons involved in the installation, operation, maintenance and repair of the overrunning clutch or the clutch shift must have read and understood theseinstructions and must comply with them at all times. Disregarding these instructions may cause damage to the product and material and/or injury to persons. Damage caused by disregard of these instructions will result in exclusion of liability. During transport, installation, dismantling, operation and maintenance of the unit, the relevant safety and environmental regulations must be complied with at all times. Lifting gears and load equipment for handling the unit must be suitable for the weight of the overrunning clutch or clutch shift. Dispose of the overrunning clutch or clutch shift in accordance with national regulations or separate them for recycling. The overrunning clutch and clutch shift must be stored in dry environment. Adequate preservation must be carried out. Operators and users must not make any changes to the overrunning clutch or clutch shift themselves over and above the action specified in these instructions. If there is any visible damage the overrunning clutch or clutch shift must not be fitted and not be put into operation. The overrunning clutch or clutch shift must not be operated unless housed in suitable enclosure in accordance with the standards applying. This also applies to test runs and when checking the direction of rotation. All work on the overrunning clutch or clutch shift must be carried out only when it is at standstill. Secure the drive unit to prevent unintentional switchon! notice should be attached to the ON switch stating clearly that work on the overrunning clutch or clutch shift is in progress. In addition to any generally prescribed personal safety equipment (such as safety shoes, safety clothing, helmet) handling the overrunning clutch or clutch shift requires wearing suita