Bevel-helical gear reducers B2 H Hth to th position of Article No and Article B2FH-15-C

Flender/Flender Gear Units/Bevel-helical gear reducers B2

ns are meant for being installed in machine and that their putting into operation is prohibited until it has been ascertained that the machine, in which these components will be installed, corresponds to the regulations of the EC directive 9/3/EEC (original version) incl. all further amendments. All the harmonised standards published by the EC-Commission in the official journal of the European Community applicable for our products are either totally or partly observed with thismanufacturers declaration These are especially: -EN 2-1 -EN 2-2-EN 2 -EN 3 -EN 6-1 Tbingen, the 3.0.1 (Manager of Standards Department) BB3 Supplement to operating instructions ATEX MOTOX- Gear units and gear motors in ATEX design Contents 1.2 Proper usage 2 3.1 General technical data on the rating plate 2 5.1 Coats of paint 2 6.1 General information on installation - Potential equalisation 2.1.1 Oil level check - Checking the oil level sensor 2 1. Maintenance and servicing of gear units in explosion-hazardous locations 3 1. Declaration of the manufacturer - Declaration of Conformity 4 FLENDER TBINGEN GMBH Bahnhofstr. 4-4 -7 Tbingen Tel. +4 (0) 7/7-0 Fax +4 (0) 7/7-4 http:// Germany flender HB series gearbox -Price: sales-motox Siemens Flender flender-motox HB series gearbox company of . Friedr. Flender GmbH 2 / 4Supplement to ATEXNote. These operating instructions contain only the supplements to MOTOX--gear units in ATEX design. Please note the complete sets of operating instructions BA F2 EN 1.0, BA K2 EN 1.0, BA G2 EN 1.0, BA S2 EN 1.0. 1.2 Proper usage The gear motor satisfies the requirements of the explosion protection guideline 9/9/EC if the permitted conditions indicated on the rating plate are adhered to. 3.1 General technical data on the rating plate 1 Type designation 2 Assembly option, order number 3 Output speed, 2 = output torque, transmission ratio, service factor, input speed, T1 = input torque 4 Explosion-Hazard symbol and explosion-hazard marking, CE marking 5 Oil quantity, oil grade, weight 6 Bearing life 5.1