hapter Cooling options see page onwards Ap B2DV-14-C Bevel-helical gearboxes B2

Flender/Flender Gear Units/Bevel-helical gearboxes B2

nd upper modules will constit ute another branch. This will make it possible for upper modules to con tinue producing energy even th ough lower modules are in the shadow. Maintaining the integrity of the covering The attachment of structures to the building must keep to the sealing efficiency of the covering and mechanical integrity of the building. Special care shall be exe rcised with terrace fitted units where the quality of the covering and relate structure is often very poor. It is advisable to have structures laid onto the building instead of attached to it. Safety Attention should be given in the operation and maintenance proc edures to the following safety requirements: ) Emergency shutdown procedure; ) Obey all warning signs; ) Shut system down and interrupt PV array currents according the manual shutdown procedure; ) Split strings into extra low voltage sections (if relevant); ) Warn of the live parts that annot be de-energised during da ylight. 0.1.1 DRAWINGS AND DOCUMENTS 0.1.1.1 The following drawings (in three sets) shall be submitted for approval within 3 weeks 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Solar photo voltaic ( SPV) power supply system Chapter-0.1 2, MECON Limited, All Right Reserved Page 2 of 2 of award of contract. ) Geographical survey report required for solar system design, ti lt angle calculations etc ) Geo Graphical Data of the site (Avg Insolation, Wind Flow, Sola Radiation data (Monthly), Weather Conditions etc as required in the design) ) Solar array sizing, charge controller sizing and PCU calculati ons. ) Data sheets & specification of SPV Modules, MPPT Chargers. ) STAAD analysis repor of SPV structure ) SPV array installation & foundation drawings ) PVSyst Simulation reports for On-grid & Off-Grid systems. ) 3x 1 phase grid charger siz