B2-KV-18B GMDENAir intakeFan approx LSSd dD s Bevel-helical gear reducer B2
In stock
SKU
B2-KV-18B
$13,392.86
Flender/Flender Gear Units/Bevel-helical gear reducer B2
nm - - 0.3 dB/Km max (outside plant) 1 dB/Km max (inside plant) 2.1 Attenuation FLENDER GRAFFENSTADEN 1 nm -
- 0.2 dB/Km max (outside plant) 1 dB/Km max (inside plant) 2.1 Numerical Aperture 0.2 + 0.0.2 + 0.0 2.1 
Number of Fibers per core / tube4 (minimum) 2.1 Fibre colorin Shall conform to EIA/TIA-5 2.1 Fiber Proof test As 
per IEC/EIA & other international stan dard. 2.1 Coating Diameter Test As per IEC/EIA & other international standard. 2.1 Strength 
member Aramid Yarn to reinforce the integrity of data transmissio 2.2 Buffer Tube fillin gThixotropic jelly or better material 2.2 Core wrappin / Water Swellable Tape / Suitable Water Blockin 1 of 1 INDRADHANUSH GAS GRID LIMITED TECHNICAL SPECIFICATION FOR NATURAL GAS COMPRESSOR STATION FOR NORTH EAST GAS GRID PIPELINE PROJECT TS NO.: MEC//2UU/0/2/0 Control & Instru mentation (&) Chapter-0.0 2, MECON Limited, All Right Reserved Page 5 of 1 Moisture barrie Gel 2.2 Loose tube Polyamide/PBTP or other acceptable Thermoplastic materi al 3.0 Cable Construction 3.1 Desi gn Loose Tube desi gn 3.2 Type Dual jacket Armoured with Poly Ethylene sheathing (for outdoor applications) 3.3 Buffer Tubes Shall be stranded around the central member utilizin reverse oscillatin lay (ROL) 3.4 Interstices / cable fillin Thixotropic jelly or better material 3.5 Blank fillers Shall be used as necessary to maintain circul ar cable structure. Fillers shall be flame retardant and moisture resistant. 3.6 Inner Sheath Flame retardant & UV resistant Pol yethylene 3.7 Outer Jacket High density Polyethylene (HDPE) minimum 1.5 mm thick, Flame retardant & UV resistant 3.8 Outer Colou ge 3.9 Armour Co-polymer coated teel tape, corrugated and wrapped around the inner jacket to provide additional compression strength and termite & rodent protectio 3.1 Ripcord Two highly visible ri pcords shall be placed under the jacket / armour for easy outer jacket / sheath removal. 3.1 Central Strength membe| Model Type | Bevel-helical gear reducer B2 |
|---|---|
| Gear Type | Bevel Helical Gear |
| Weight (kg) | 625.000000 |
| Ratio Range | 1 : 7.1…20 |
| Low Speed Output | Hollow shaft with spline acc. to DIN 5480 |
| Nominal Torque | 230000 Nm |
| Mounting Arrangements | Vertical mounting position |
| Manufacturer | FLENDER GRAFFENSTADEN |
| Country of Manufacture | Spain |
| Data Sheet & Drawings | B2-KV-18B GMDENAir intakeFan approx LSSd dD s Bevel-helical gear reducer B2 |
Related Products
