Bevel-helical gear unit B2 ative to the high speed shaft HSS Mass moments of B2-HH-12-A

In stock
SKU
B2-HH-12-A
$74,464.29

Flender/Flender Gear Units/Bevel-helical gear unit B2

mospheric influences and diluted acid and alkaline solution ( 3%); good mechanical resistance to abrasionExcellent resistance to weak acid and alkaline solution (5%), oil, grease, benzine, cooling emulsion, salt, solvent; tough and scratch-resistant coating film Temperature resistance4C ... +1 up to 1 for short time4C ... +1 4C ... +1 RemarkStandard coat of lacquer with excellent adhesive characteristicsStandard coat of lacquer for cooling tower and agitator drive or if sea water resistance below deck or similar is required2K-Epoxy lacquer chalks in case of installation in the open (does not effect the quality), high gloss with good mechanical resistance Table 5.1.2: Paint finish BA G2 EN 0.0 1 / 4.1.3 Primed finish Paint system Primed Unpainted Standard colour RAL 7 - Typical area of useFor overpainting*): adhesive agent for all common paint systems, temporary corrosion protectionFor overpainting*): (adhesive agent) temporary corrosion protection OverpaintabilityExcellent with: plastic lacquer, synthetic resin lacquer, 2K-PUR lacquer, 2K-Epoxy lacquer, SH lacquer, 2K-AC lacquerExcellent with: plastic lacquer, synthetic resin lacquer, oil paint, bitumenous paint, 2K-PUR paint 2K-Epoxy paint Chem. phys. resistanceGood resistance to cleaning agent, to salt spraying and resistant to oil and benzine- Temperature resistance 4C ... +1 (4C ... +1 ) RemarkAdhesive agent with excellent adhesive characteristics and good corrosion protectionComponents from grey cast iron dip-primed, components from steel primed or galvanised, components from Al and plastic untreated Table 5.1.3: Primed finish *)On drives with primed or painted finish the name plate and the covering foil are provided with paint-resistant foil (see 5.. They enable painting over without further preparation, .. masking, etc. After the paint coat has hardened (is at least hard to the touch) peel off the paint-resistant foil: Covering foil Name platePaint-resistant foilPeeling-off tab 1 Company logo Lift t
More Information
Model Type Bevel-helical gear unit B2
Gear Type Bevel Helical Gear
Weight (kg) 3475.000000
Ratio Range 1 : 6.3…22.4
Low Speed Output Hollow shaft with keyway acc. to DIN 6885/1
Nominal Torque 66300 Nm
Mounting Arrangements Horizontal mounting position
Manufacturer FLENDER TÜBINGEN GMBH
Country of Manufacture Tajikistan
Data Sheet & Drawings Bevel-helical gear unit B2 ative to the high speed shaft HSS Mass moments of B2-HH-12-A